Eternabond

Eternabond Double Sided Tape 1" x 50' Roll (15.2m)

SKU: RVO640
Availability: Usually ships in 24 hours
TYPE: Repair Tape
COLOUR: Grey
Attachments: 1
attach_Brochure: /content/RVO640_11.pdf
$99.99

EternaBond's new pressure activated MicroSealant Technology is a sealant so advanced it permanently bonds to virtually any roof type.  It is ideal for repairing flashings, gutter, skylights, copings, ductwork, and more.

DoubleStick is pure EternaBond advanced MicroSealant with a removable siliconized release liner on each side.  Designed to bond two surfaces, even two surfaces made of two or more dissimilar materials.  Double- Stick creates a tight, permanent, waterproof seal. DoubleStick remains flexible to temperatures as low as -57°C making it virtually impossible to thermally shock the seal causing a leak.

DoubleStick Bonds to a wide range of surfaces including EPDM, TPO, most PVC, CSPE/ Hypalon, CPE , SBS, APP modifieds, asphalt BURs, coal tar BURs, tiles, shingle, coated and non-coated aluminum and metal roofs, galvanized steel, gypsum board, wood, polyethylene, propylene, polystyrene, fiberglass, brick, concrete, masonry, OSB board, shielding membranes, etc.

Basic Use:
DoubleStick tape is a self-sealing adhesive creating a water-tight, conformable seal between two or more irregular surfaces, and/or creates a weather proof, permanent bond between two or more similar or dissimilar surfaces. Use as a lap seal, under the foot of an equipment curb or skylight, or roll it into a bead or ball of MicroSealant to form a gasket, seal a hole or gap as needed.
 
Surface Preparation:
Surface must be clean and dry.  Moisture, dust, dirt, or other foreign matter should be removed.  Remove oil and grease, etc. with Eternaprime (RVO699) or a non residue cleaner such as acetone or lacquer thinner.  Remove salt and other contaminants.

Customers Also Viewed